Murnan, Sean

In his role as a process engineer, Sean develops process models and calculations for system evaluation, and performs feasibility analysis for various...

Joined:

About Murnan, Sean

In his role as a process engineer, Sean develops process models and calculations for system evaluation, and performs feasibility analysis for various biosolids projects. He also provides startup, commissioning, and operational assistance for Synagro drying facilities. Sean holds a Mechanical Engineering degree from the University of Hartford and a Master’s Degree in Sustainable Engineering from the Rochester Institute of Technology.

Murnan, Sean

Titles from this speaker

Description: Relief of Undigestion: Optimizing a Biosolids Drying Facility in Response to Major...

Relief of Undigestion: Optimizing a Biosolids Drying Facility in Response to Major Feedstock Changes

Abstract

The City of Cumberland, Maryland is a city resting in the Appalachian Mountains on the western side of the state. The City operates the Cumberland Wastewater Treatment Plant (WWTP), an advanced wastewater treatment facility with an annual average design capacity of 15 MGD to meet the needs of its ~20,000 residents. In 2008, the City started the solicitation process for a Heat Drying Facility (HDF) that would process all of the biosolids generated at the WWTP into a Class A EQ product for beneficial reuse. The treatment process at the time included Biological Nutrient Removal (BNR) that was being upgraded to an Enhanced Nutrient Removal (ENR) process, along with an Anaerobic Digester and Lime Stabilization process to treat their biosolids. NEFCO began operations of the HDF in late 2010 and operations went smoothly. In 2013, the City informed NEFCO that there would be an extended shutdown of the Anaerobic Digester for maintenance work. During most of 2013 and 2014, NEFCO processed undigested sludge from the WWTP through the HDF. It is no secret in the biosolids industry that the treatment of undigested biosolids comes with a long list of associated issues. Undigested sludge leads to highly variable feedstock quality that will impact both processing capabilities and product marketing options. The Primary Sludge will be more odorous, will contain a large amount of grit and trash, and has a fibrous nature that will significantly impact the quality of the dried biosolids. Facilities processing undigested will experience finished product with less size uniformity, low product densities caused by high fiber content, stronger odors from both dewatered sludge cake and finished dried product, and higher generation of dust. The undigested sludge will also increase wear on major pieces of equipment and limit throughput of the facility during periods of low density. These issues also coincided with an increased demand on the HDF, as there was no longer any solids destruction from the Digester. This led to a very challenging time for operations with a longer processing schedule, increased staffing, and frequent unplanned shutdowns. The NEFCO team developed approaches to handle these challenges, made it through these issues, and got back to regular operations once the Digester came back online in 2014. In 2020, the City again announced plans to shut down the Digester. However, this time it appeared that it may be a permanent shutdown as the City was struggling with the financial case to repair the Digester for reliable operation. Being a smaller facility, the savings from utilizing the biogas produced by the Digester was not enough to make for an attractive return on investment. Realizing that the approaches used in 2013/14 would not be sustainable for long term operations, NEFCO developed a plan to optimize the drying process to mitigate the issues brought on by an undigested feedstock. The team started by reviewing the data available from the 2013/2014 Digester shutdown and summarizing the processing issues from that period and what was done to address them. The team also consulted with staff in NEFCO's Detroit facility, which also processes undigested sludge, to prepare some lessons learned from their operations that could help with the adjustments in Cumberland. A plan was then developed which focused on a combination of operations and process equipment adjustments, evaluating the major solids handling systems that are part of the drying process and looking for ways to adjust their operation to address the bottlenecks. This included the centrifuge dewatering system, pugmill mixer, product screener, and crusher mill. For each piece of equipment, the team consulted vendors and reviewed O&M manuals from manufacturers to come up with a list of action items to be taken. This list of action items was then assigned to team members and ranked in priority to produce an overall action register to guide the efforts. By far the most important process-related task was to address the issues with the sludge feed to the centrifuge. The shutdown of the Digester had led to excessive amounts of trash being present in the sludge, which was frequently plugging the feed line to the centrifuge. NEFCO worked with their Corporate Leadership to expedite the procurement and installation of a grinder system to deal with this trash problem, which led to a significant improvement in plant operations. One of the greatest benefits of a biosolids drying facility is the final pelletized product, which has significant fertilizer and alternative fuel beneficial uses. There were still several product-related issues, dealing mostly with the poor size distribution and low density of the product. The team continued to work its way through the action register, making incremental changes that eventually began to show improvements. Some of the changes were counter intuitive to what might be expected, such as adjustments to the crusher mill. The crusher is meant to take the oversized portion of the product from the screener and bring them back down in size so that they can be recycled to the front of the process as part of the pugmill mix. The issue that came up in Cumberland was that after the Digester was shut off, the product became more pliable and would get flattened by the crusher instead of breaking apart. These flattened pieces would not mix well or be broken up in the pugmill, leading to an accumulation of them in the recycle bin that would then cause issues for the operators trying to control the level in the bin. The answer here came from the advice from the Detroit facility, which had experienced this in the past. They had increased the gap between the rolls in the crusher to reduce the number of pellets being flattened. It was initially thought that this would cause more issues, allowing larger pellets to make it to the recycle bin untouched. However, this change did have a positive impact on the product being sent to the recycle bin and helped the operators maintain their bin levels. This is just one example of a meticulous process to improve the plant's operations and quality of the final biosolids product. Similar efforts were put into reviewing the operation of the pugmill mixer and screener to try and stop pellets from getting too big in the first place. Figures 1 & 2 below show the significance of these changes, measured by performing a sieve analysis on the product stream before being screened. Throughout the process of working on these tasks, the operators of the plants diligently ran sieve tests on a regular basis, on top of their normal lab work, to understand how the changes they were making were impacting the product quality. The reduction in the amount of material on the #4 and #5 Tyler mesh screens was a major goal of the project that was able to be reached by the hard work of the team. A final achievement of the team was the increased throughput of the facility. Much of the equipment works more efficiently and effectively when operated at its design throughput, so through all the work put in to address the issues from the change to an undigested feedstock the processing capacity of the plant was pushed to a higher level than it ever had been. This has led to much more efficient utilities usage rates and other consumables on a per ton processed basis. The plant also now operates on a similar schedule to when it was processing digested sludge, a welcome relief to the dedicated operating staff at the HDF. The effort to address the change in the sludge in Cumberland has turned into a Continuous Improvement activity for the plant, and the team still regularly meets to work on improving operations at the facility. €ƒ Figure 1: Pellet Size Distribution from before Improvements, shown in % by weight retained on sieve screens measured in Tyler Mesh # Figure 2: Pellet Size Distribution (based on Tyler Mesh #) from after Improvements, shown in % by weight retained on sieve screens measured in Tyler Mesh #

This paper was presented at the WEF/IWA Residuals and Biosolids Conference, May 16-19, 2023.

SpeakerMurnan, Sean

Presentation time

14:00:00

14:30:00

Session time

13:30:00

16:45:00

SessionSession 13: Case Studies

Session number13

Session locationCharlotte Convention Center, Charlotte, North Carolina, USA

TopicTroubleshooting & Optimization

Author(s)

S. Murnan

Author(s)S. Murnan1, M. Irujo2, 3, 4,

Author affiliation(s)NEFCO (New England Fertilizer Company)1

SourceProceedings of the Water Environment Federation

Document typeConference Paper

PublisherWater Environment Federation

Print publication date May 2023

DOI10.2175/193864718825158844

Volume / Issue

Content sourceResiduals and Biosolids

Word count15

Description: Self-heating of Dried Biosolids: Causes and Mitigation Options for Drying...

Self-heating of Dried Biosolids: Causes and Mitigation Options for Drying Facilities

Abstract

Organic-based fertilizer resources, such as compost and pelletized biosolids, have been known to have the potential to self-heat while in storage or transportation. This phenomenon has been reported since the 1920's, though not all products exhibit this characteristic. Self-heating of product stored in silos at production facilities or in bulk at fertilizer blenders or field application sites can lead to odor and other nuisance conditions if the self-heating can progress to a smoldering event. As the industry leader in biosolids drying, Synagro has done considerable work to understand the mechanisms that cause reheating and to identify methods to mitigate this issue. One major mechanism that can cause reheating is related to chemical reactions that can occur based on compounds present in the biosolids feedstock for the drying process. Specifically, un-oxidized iron transitioning to an oxidized form (an exothermic reaction) post-drying has been identified as an initiator of the self-heating processes. A literature review on the topic of reheating of dried biosolids showed several research papers that pointed to a link between iron and instances of reheating. This research showed that the interaction of iron and sulfur has an impact on the duration and time for onset of reheating events [1, 2]. While these studies were based on biosolids that came predominantly from tanneries, further studies had shown similarity between these tannery biosolids and biosolids from predominantly municipal sources with respect to reheating [3]. Synagro has operational experience with reheating of dried product, and our own internal investigations came to similar conclusions on the iron content of the biosolids leading to reheating issues. Table 1 summarizes details from several facilities on iron and sulfur content of their biosolids, chemical addition at the treatment plants they service, and the extent of reheating experienced at the drying facilities. Biological activity in dried biosolids is also a source of reheating concern based on industry knowledge and research on the topic. Dryer systems are designed to destroy biological activity in the biosolids to meet the regulatory requirements for land application, and data from numerous facilities show that drying systems perform exceptionally well with respect to those standards. Even after the drying process, though, there can be residual levels of micro-organisms remaining that may cause reheating. However, the conditions to trigger biological reheating typically occur over a longer period of time and are more of a concern for longer term storage. There are additional compounding factors that can cause both reactions to occur. Specifically, both the chemical and biological reactions are driven by the presence of oxygen and moisture. Research into moisture impact on dried biosolids reheating showed higher moisture content leading to longer durations of reheating with higher maximum temperatures [4]. The availability of oxygen will also impact these reactions, with oxygen in this case coming through interactions with air. A lab scale study on biosolids reheating found that the presence of moisture alone was not able to cause spontaneous reheating and showed that the introduction of air (oxygen) had an immediate impact on reheating events on samples that had been rehydrated [5]. The exposure of the biosolids to air and moisture can be made worse by the physical characteristics of the dried biosolids produced by the drying process. The geometry of the product being stored can impact the amount of void space in the bulk material, and thus many pathways for air to interact with the product. On a smaller scale, the porosity of the surface of the product can also impact the availability of oxygen for these reactions to occur. It is critical to identify the issue in the preliminary stages of the project and plan accordingly. When evaluating whether a potential pelletized product is likely to self-heat there are several characteristics that can be used to identify the level of concern over these issues, including: - Iron and Sulfur Concentrations - Particle Size Distribution - Product Storage Equipment and Management Techniques - Process Additives - Product Dryness Based on the outlook for reheating for a specific biosolids project, there are several options for addressing any potential concerns. Drying facilities are often designed with nitrogen blanketing systems for key pieces of equipment where dried biosolids are stored in order to keep oxygen levels low to prevent these types of reactions. Some systems may also have oxygen monitoring within the process as well to ensure low oxygen levels on a continuous basis. Additional options for monitoring the process for signs of reheating include thermal imaging cameras and Carbon Monoxide sensors. Each drying system is unique, which will inevitably lead to site specific considerations. The Great Lakes Wastewater Authority's drying facility is a great example of a plant that has been able to proactively identify and address potential areas where reheating may occur through projects to optimize the existing process equipment. The key to these projects was the flow of material through the system and eliminating areas where product may become stagnant within the process. The first project was a modification to the facility's recycle bin, which sometimes had product bridging that could lead to hot spots. The lower portion of the recycle bin where the product is discharged was modified to promote better material flow, which has greatly reduced areas of product accumulation. Another project, which was completed in May of 2023, was a redesign of the ductwork section on the outlet of the dryer. The original design had a lengthy horizontal run (10-15 ft) before a short radius 90° elbow connected to a vertical run of ductwork. Dried product suspended in the process air stream would be carried from the dryer through this ductwork to the roof of the facility, where a cyclone separator would separate the product from the air. It was determined that larger product would fall out of suspension in the horizontal ductwork section, causing a buildup of material at the elbow. In early 2023 it was decided to redesign this ductwork section to address the product build up at the elbow. Computational Fluid Dynamics (CFD) modeling was done to look at the airflow in the ductwork and find an alternative design that would increase air velocity to help keep the product suspended in the air stream. Since the redesigned elbow has been installed, the plant staff have observed practically zero buildup of material in the new ductwork.

This paper was presented at the WEF Residuals and Biosolids Conference, June 18-21, 2024.

SpeakerMurnan, Sean

Presentation time

10:45:00

11:15:00

Session time

08:30:00

11:15:00

SessionTroubleshooting & Optimization

Session number26

Session locationOklahoma City Convention Center, Oklahoma City, Oklahoma

TopicEquipment Reliability, Root Cause Analysis, Thermal Processes

Author(s)

Murnan, Sean

Author(s)S. Murnan1

Author affiliation(s)Synagro 1;

SourceProceedings of the Water Environment Federation

Document typeConference Paper

PublisherWater Environment Federation

Print publication date Jun 2024

DOI10.2175/193864718825159458

Volume / Issue

Content sourceResiduals and Biosolids Conference

Word count12

Base text size -

Murnan, Sean

About Murnan, Sean

My Recent Activity